A practical reference on CJC-1295: what it is, how it behaves, what the literature reports, and where the honest uncertainties sit.
This page was last updated on 2025-10-17 and is reviewed periodically as new material appears.
Two related peptides circulate under the CJC-1295 label, and they differ mainly in how long they persist in circulation. The version carrying a drug affinity complex includes a maleimidopropionic acid linker that forms a covalent bond with serum albumin. The other version, usually written as modified GRF(1-29) or tetrasubstituted GRF(1-29), lacks that linker and is cleared quickly. Mixing the two produces inconsistent readings of published half-life values, because the linker rather than the receptor-facing sequence drives most of the difference.
The core sequence keeps the receptor-binding region of GHRH while replacing four positions that are vulnerable to dipeptidyl peptidase-4 and other proteases. Substitutions at positions 2, 8, 15, and 27 raise metabolic stability relative to the natural hormone. The N-terminal residues remain essential for activity, so changes there generally lower potency. Molecular weight sits near 3368 daltons for the tetrasubstituted analog without the linker, while the albumin-binding form is heavier because of the added maleimide group.
CJC-1295 is a synthetic peptide modeled on growth hormone-releasing hormone, the hypothalamic signal that prompts the pituitary to release growth hormone. Its sequence corresponds to the first twenty-nine residues of human GHRH, with four substitutions that slow enzymatic breakdown. Early descriptions placed the compound in research on growth hormone deficiency and related conditions, and later literature groups it with the long-acting GHRH analogs. The name appears in both laboratory and popular fitness writing, where it sometimes labels chemically different peptides.
The peptide backbone includes a D-alanine at position two, which resists cleavage by dipeptidyl peptidase IV, and several other substitutions that reduce degradation. Its molecular weight is roughly 3.4 kDa without the linker and about 3.6 kDa with it. The molecule is water soluble and is normally supplied as a lyophilized powder. Precise sequence and mass values depend on which variant is described, so technical documents usually state the exact form being referenced.
CJC-1295 is a synthetic peptide designed as a long-acting analogue of growth hormone-releasing hormone (GHRH). Its structure derives from the first 29 amino acids of native GHRH, a fragment often called GRF(1-29). Four substitutions were introduced to slow enzymatic breakdown and extend activity relative to the natural sequence. The compound was developed by ConjuChem as part of a broader effort to improve the pharmacokinetic profile of peptide hormones. It is studied in laboratory and clinical research settings rather than appearing as a naturally occurring substance.
Two related forms circulate in technical discussion under the same family name. The original version carries a drug affinity complex (DAC) that binds covalently to serum albumin after administration, and this linkage substantially extends circulation time. A second form, frequently written as modified GRF(1-29) or CJC-1295 without DAC, lacks that linker and clears much faster. The naming is a frequent source of confusion because the shorthand CJC-1295 can refer to either form depending on the source. Reports sometimes fail to specify which variant was studied.
| Property | Value | Notes |
|---|---|---|
| Class | Synthetic peptide | GHRH receptor agonist |
| Sequence length | 29 amino acids | Derived from human GHRH |
| Molecular weight | About 3368 Da without linker | Albumin-binding form is heavier |
| Appearance | White to off-white lyophilized powder | Common form for research reference material |
| Typical storage | -20 °C or below, desiccated | Protect powder from light and moisture |
Reconstitution is typically performed with sterile water or bacteriostatic water, added slowly against the vial wall. The resulting solution should be clear and colorless; cloudiness or visible particles suggest a problem with the material or the diluent. Once in solution, the peptide is less stable than the dry powder. Refrigerated storage at two to eight degrees Celsius is common for short-term holding, while freezing aliquots is described for longer periods.
Purity is most often assessed by reversed-phase high-performance liquid chromatography, reported as a percentage of total peak area. Identity is confirmed by mass spectrometry, which yields a molecular ion consistent with the expected sequence. Amino acid analysis and peptide mapping provide additional characterization. Reported purity values are method-dependent, so figures from different laboratories are not always directly comparable without details of column, gradient, and detection wavelength.
Reported half-lives differ widely between the two variants and between species. Values for the albumin-binding form are usually expressed in days, while the unconjugated form is measured in minutes to a few hours. Sampling schedules, assay sensitivity, and route of administration all influence the numbers, which limits direct comparison across studies. Whether sustained receptor occupancy produces different downstream effects from pulsatile stimulation remains an open question in the published work. Claims about relative potency should therefore be read alongside the specific study design that produced them.
Lyophilised powder is the usual supplied form. The material is hygroscopic, so vials are typically equilibrated to room temperature before opening in order to prevent condensation on the contents. Long-term storage is generally described at minus twenty degrees Celsius or colder, protected from light and moisture. Repeated freeze-thaw cycles are avoided because they promote aggregation and loss of soluble material. A reconstituted solution is considerably less stable than the dry powder and is normally kept refrigerated for short periods only.
Identity and purity are assessed mainly by reversed-phase high-performance liquid chromatography combined with mass spectrometry. The chromatographic separation resolves the target peptide from truncation products and from species carrying oxidised residues, while mass measurement confirms the expected molecular mass. Because the two common variants differ by roughly 280 daltons, a mass determination distinguishes them unambiguously. Purity is often quoted as a percentage of total peak area, although that figure depends on the detection wavelength and the integration method applied.
Reverse-phase high-performance liquid chromatography is the standard tool for purity assessment. The technique separates the target peptide from truncated or modified byproducts. Mass spectrometry confirms molecular weight and supports sequence verification. Electrospray ionization and matrix-assisted laser desorption are both used. Amino acid analysis provides an independent check on composition. Purity values are commonly reported as area percentage from the chromatogram. Residual trifluoroacetate and water content are also measured in many quality programs.
Batch-to-batch consistency depends on solid-phase peptide synthesis and subsequent purification. Coupling efficiency, resin choice, and cleavage conditions all affect the final profile. Counter-ion content and moisture can shift the apparent mass of a batch. Documentation typically includes a certificate of analysis with chromatograms and spectra. Independent verification by a second laboratory is sometimes requested. Whether a given certificate reflects the actual vial contents depends on chain of custody. Analytical methods themselves carry uncertainty that should be stated alongside results.
Lyophilized material is typically stored at minus twenty degrees Celsius or lower. Keeping the vial dry and protected from light preserves peptide integrity. Repeated freeze-thaw cycles can cause aggregation or loss of activity. Once dissolved, solutions are generally kept at two to eight degrees Celsius. Stability data for reconstituted solutions vary, and long-term behavior is not fully established. Working aliquots reduce the number of times a stock container is opened.
Polycondensation involves the formation of polymers through condensation reactions between different species, creating condensation polymers. With automated synthesis, General electric manufactured an approach for melt-polymerizations of BPA and diphenyl carbonate (DPC), using sodium hydroxide (NaOH) as the catalyst. Once the results were analyzed, it was shown that, by using an automated method of polymerization, the effect of varying the catalyst amount became more distinct and improved the reproducibility for the reaction. Furthermore, it demonstrated an increase within the homogeneity of the polymers in the microreactors.
Plants and animals alike both use small polypeptides for signaling in cell-to-cell communication. CLAVATA3/Embryo Surrounding Region-Related, also known as a plant peptide hormone, signaling is important for cell to cell signaling but also long distance communication. These two actions are especially important for plant cells because they are stationary and must perform cell expansion. In multicellular organisms, cell-to-cell communication has been found to be very crucial for many growth processes that occur inside the organism. The 12 or 13 amino acid polypeptides are the mature forms of the CLE proteins that are derived from the conserved CLE domains. More and more CLE genes are being identified with more research being conducted in this area. CLE genes have not only been found in seed plants but also in lycophytes, bryophytes, and green algae.
== The mechanism of thiol–disulfide exchange between oxidoreductases == The mechanism of thiol–disulfide exchange between oxidoreductases is understood to begin with the nucleophilic attack on the sulfur atoms of a disulfide bond in the oxidised partner, by a thiolate anion derived from a reactive cysteine in a reduced partner. This generates mixed disulfide intermediates, and is followed by a second, this time intramolecular, nucleophilic attack by the remaining thiolate anion in the formerly reduced partner, to liberate both oxidoreductases. The balance of evidence discussed thus far supports a model in which oxidising equivalents are sequentially transferred from Ero1 via a thiol–disulfide exchange reaction to PDI, with PDI then undergoing a thiol–disulfide exchange with the nascent polypeptide, thereby enabling the formation of disulfide bonds within the nascent polypeptide.
Following TNF-R1 and Fas activation in mammalian cells a balance between proapoptotic (BAX, BID, BAK, or BAD) and anti-apoptotic (Bcl-Xl and Bcl-2) members of the Bcl-2 family are established. This balance is the proportion of proapoptotic homodimers that form in the outer-membrane of the mitochondrion. The proapoptotic homodimers are required to make the mitochondrial membrane permeable for the release of caspase activators such as cytochrome c and SMAC. Control of proapoptotic proteins under normal cell conditions of nonapoptotic cells is incompletely understood, but in general, Bax or Bak are activated by the activation of BH3-only proteins, part of the Bcl-2 family.
S-Arrestin is a protein found in mice that binds to rhodopsin to stop its activity, preventing further signaling. S-arrestin binds to G protein-coupled receptors (GPCRs), like rhodopsin, following receptor activation and phosphorylation by G protein-coupled receptor kinases (GRKs). Rhodopsin is found in rod cells of the retina, essential for vision. It detects light and initiates a signaling cascade called phototransduction. However, excessive activation can be harmful, so it must be carefully regulated. The phosphorylation of the receptor's intracellular loops and C-terminal tail creates a high-affinity binding site for S-arrestin. S-arrestin then sterically hinders further G protein coupling, effectively desensitizing the receptor and directing it towards alternative signaling pathways or internalization via clathrin-mediated endocytosis.
Sources: en.wikipedia.org
Camurus AB (publ) is a Swedish research-based pharmaceutical and biotechnology company specialising in the commercialization of medicines for treating serious and chronic diseases. Established in 1991 and based in the southern university city of Lund, in the Medicon Valley region, the company is listed on Nasdaq Stockholm, Mid Cap. Camurus was founded by scientists in biophysical, food, and pharmaceutical chemistry with expertise in lipid phase structures. The company provides nanoscale drug-delivery systems for development of high-value therapeutics.
In addition to killing bacteria directly they have been demonstrated to have a number of immunomodulatory functions that may be involved in the clearance of infection, including the ability to alter host gene expression, act as chemokines and/or induce chemokine production, inhibiting lipopolysaccharide induced pro-inflammatory cytokine production, promoting wound healing, and modulating the responses of dendritic cells and cells of the adaptive immune response. Animal models indicate that host defense peptides are crucial for both prevention and clearance of infection. It appears as though many peptides initially isolated as and termed "antimicrobial peptides" have been shown to have more significant alternative functions in vivo (e.g. hepcidin). Dusquetide for example is an immunomodulator that acts through p62, a protein involved in toll like receptor based signalling of infection. The peptide is being examined in a Phase III clinical trial by Soligenix (SGNX) to ascertain if it can assist in repair of radiation-induced damage to oral mucosa arising during cancer radiotherapy of the head and neck.
Extrapituitary prolactin is controlled by a superdistal promoter, located 5.8 kb upstream of the pituitary start site. The promoter does not react to dopamine, estrogens, or TRH. Instead, it is stimulated by cAMP. Responsiveness to cAMP is mediated by an imperfect cAMP–responsive element and two CAAT/enhancer binding proteins (C/EBP). Progesterone upregulates prolactin synthesis in the endometrium but decreases it in myometrium and breast glandular tissue. Breast and other tissues may express the Pit-1 promoter in addition to the distal promoter. Oct-1 appears able to substitute for Pit-1 in activating the promoter in breast cancer cells. Extrapituitary production of prolactin is thought to be special to humans and primates and may serve mostly tissue-specific paracrine and autocrine purposes. It has been hypothesized that in vertebrates such as mice a similar tissue-specific effect is achieved by a large family of prolactin-like proteins controlled by at least 26 paralogous PRL genes not present in primates.
Annals of Clinical Biochemistry is a bimonthly peer-reviewed scientific journal covering all aspects of clinical biochemistry. The editor-in-chief is Michael J Murphy (University of Dundee). It was established 1960 and is published by SAGE Publications on behalf of The Association for Clinical Biochemistry and Laboratory Medicine. The journal is abstracted and indexed in: According to the Journal Citation Reports, its 2012 impact factor is 1.922, ranking it 12th out of 31 journals in the category "Medical Laboratory Technology". Official website
Amyloid proteins deposit most commonly inside the knee, followed by hands, wrists, elbow, hip, and ankle, causing joint pain. In males with advanced age (>80 years), there is significant risk of wild-type transthyretin amyloid deposition in synovial tissue of knee joint, but predominantly in old age deposition of wild type transthyretin is seen in cardiac ventricles. ATTR deposits have been found in ligamentum flavum of patients that underwent surgery for lumbar spinal stenosis. In beta 2-microglobulin amyloidosis, males have high risk of getting carpal tunnel syndrome. Aβ2MG amyloidosis (Hemodialysis associated amyloidosis) tends to deposit in synovial tissue, causing chronic inflammation of the synovial tissue in knee, hip, shoulder and interphalangeal joints. Amyloid light chains deposition in shoulder joint causes enlarged shoulders, also known as "shoulder pad sign". Amyloid light chain depositions can also cause bilateral symmetric polyarthritis. The deposition of amyloid proteins in the bone marrow without causing plasma cell dyscrasias is called amyloidoma. It is commonly found in cervical, lumbar, and sacral vertebrae. Those affected may be presented with bone pain due to bone lysis, lumbar paraparesis, and a variety of neurological symptoms. Vertebral fractures are also common.
Sources: en.wikipedia.org
Natural GHRH is degraded quickly by dipeptidyl peptidase-4 and related enzymes, giving it a half-life measured in minutes. CJC-1295 carries substitutions that slow that breakdown, so it stays intact longer. Both act at the same pituitary receptor and produce the same class of signal.
The label was first attached to the albumin-binding form during early development work. A shorter analog without the linker later became known by the same name in informal use. Published papers normally state which version was studied, so the methods section resolves the ambiguity.
It is a synthetic peptide rather than a steroid, and it does not occur naturally in the body. Its sequence is derived from a hypothalamic hormone called growth hormone-releasing hormone. It works as a receptor agonist rather than as a replacement for that hormone.
No. It is a synthetic analogue modeled on the first 29 residues of human GHRH. The substitutions and any linker are laboratory modifications rather than features of the endogenous peptide.